I was recently contracted to renovate a Tesserae Stone Mosaic floor as part of a hotel refurbishment project in Taplow near Maidenhead. Taplow house hotel has been undergoing a large refurbishment project and originally, they planned on laying new Marble floor throughout the entrance/reception area however when they lifted the carpet the discovered the original floor and they were keen to see if the old floor could be restored to some former glory.
Taplow house was originally built in 1568, however the Manor House was involved in a devastating fire in 1660, destroying almost all the original building. The Georgian building that stands today was erected in 1751. Home to aristocracy, Taplow house was a private residence before turning into a hotel in 1958 and this is when we believe the floor was covered up with carpet.
Removing Carpet Adhesive from a Tesserae Stone Mosaic Tiles in Taplow
The main issue raised was the floor was covered in old carpet glue and this would need to be removed before it could be deep cleaned and then protected with a sealer.
After reviewing the range of Tile Doctor cleaning products and problem solvers to determine which product would be the most effective at breaking down the residue. My first thought was to use Remove and Go which was developed as a coating’s remover and my go to product to remove old sealers, paint as well as adhesive contamination.
For maximum impact on the glue the Remove and Go was applied neat to the mosaic floor and then covered with plastic sheeting so it could sweat the tile and not dry prematurely. The floor was left to dwell for about 15 – 30 minutes, so it could get to work breaking down the old carpet glue and adhesive. After this the plastic sheet was removed and the floor then scrubbed with a rotary floor buffer fitted with a black stripping pad using plenty of water. This quickly broke up the adhesive from the tile allowing it to be removed from the tiles with a wet vacuum. It was a large area so as I was cleaning one section there was another section sweating under a plastic sheet.
Once the glue had been removed, I then treated the section to an acid rinse by cleaning the floor with a mild dilution of Tile Doctor Grout Clean-up which removes old grout smears and will neutralise any salts in the old floor that could result in efflorescence later. Being an acid, this product also neutralises the ph levels in the floor after the cleaning with Remove and Go which is an Alkaline product.
Once the floor was clean it needed time to dry out thoroughly before sealing, however being a busy construction site and the floor being the main walkway between rooms I agreed to do a quick ‘builders clean’ when I returned later.
Sealing Tesserae Stone Mosaic Tiles in Taplow
After my return I gave the floor a quick clean using a mild solution of Grout Clean-up scrubbed with a Nilon brush fitted to the rotary machine. Most of the contamination was plaster residues from ongoing work. After a light rinse and extraction with a wet vacuum the floor was left to dry off overnight ready for sealing the next day.
To seal the tiles, I applied two coats of Tile Doctor Colour Grow which as its name suggests is a colour enhancing sealer that works by impregnating the pores of the tile protecting it from within and enriching the colours in the process. This gave a lovely contrast in colour whilst providing a matt finish; another advantage of Colour Grow is it’s a fully breathable sealer which won’t trap moisture under the tile which is an important for these old floors which don’t have a damp membrane.
Source: Tesserae Stone Mosaic Floor Restoration Service in Taplow Berkshire